9/8/2021 9:40:48 AM
||News Code :
The staff of the department of manufacturing grids and doors of holy shrines in the al-Abbas's (p) holy shrine, has begun to install the shrine's parts of left holy hand of Aba al-Fadl al-Abbas (peace be upon him), in the Holy Shrine's factory for the manufacture of grids and doors of holy shrines.
The head of the department, Mr. Nadhem al-Ghurabi, told Al-Kafeel Network: "After completing manufacturing all its metal and wooden parts earlier, and making the grid ready before installing it in its final place that was assigned to it next to the holy courtyard, we started installing the parts of the grid, following the work plan."
Indicating" There are three stages of installation: the first is after the completion of each piece, it is fixed on the structure of the grid, and upon completion, modifications are made or some technical matters are addressed and verified, and then it is dismantled for the purpose of starting enamel work and other works that cannot be performed while it is in this position."
He added: "The second installation stage takes place after the completion of the coating the enamel, the decorations and inscriptions for the grid, according to the designs that were developed for it, taking into account any technical note after matching, and this is what we have done at the present time," explaining, "After a period of time, the relevant authorities at the al-Abbas's (p) Holy Shrine will be informed of it and make their observations, so the staffs will dismantle the pieces and put numbers on the metal and wooden parts according to the location of each of them, to ensure that they are installed on the grid frame accurately and correctly after its final installation in the specified place.
It is noteworthy that the octagonal grid is the first to be manufactured in this design, with a diameter of (3 meters) and a height of (2.85 meters), and a structure of stainless steel with a thickness of (2 mm). It was designed and manufactured with high and precise specifications.